Ethyl cellulose N10 N100

Ethyl CelluloseCharacterMF: [C6H7O2(OC2H5)3]n                                               &nb

Featured Products

Ethyl Cellulose

MF: [C6H7O2(OC2H5)3]n                                                  
CAS No.: 9004-57-3
EINECS No.: 232-674-9
It did not dissolve in water, but soluble in many organic solvents were used as tablets, granules of the adhesive, can increase the hardness of tablets to reduce friability tablets, it can be used as film-forming agent to improve the appearance of tablets, isolated taste, to avoid the failure of water-sensitive drugs to prevent the influx of metamorphic change agents, promoting the safe storage of tablets, but also can be used as reinforcing material for Sustained Release Tablets.
Ethyl Cellulose N10 N100

Technical specification
Comply with USP, EP and CP.
ItemK gradeN grade
Ethoxy (WT%)45.5-46.847.5-49.5
Viscosity (mPa.s) (5% solu., 20ºC)4, 5, 7, 10, 20, 50, 70, 100, 150, 200, 300
Loss on drying (%)≤3.0
Residue on ignition (%)≤0.4
Chloride (%)<0.1
Heavy metals (ppm)≤20
Arsenic (ppm)≤3
Ethyl Cellulose N10 N100Ethyl Cellulose N10 N100

Ethyl Cellulose can be used as film former, binder, dispersing agent, stabilizer, water retention agent and controlled release agent in many kinds of medicine.
Ethyl Cellulose can make up some printing and coating, the coating films have good glossiness and excellent slickening capability and flexibility.
Ethyl Cellulose can make up the plastic powder which is easy to take shape, improve cold-resistant property and so on.
In other industry
Ethyl Cellulose is used as temporary coating for fluorescent lamp tube, to raise the viscosity of phosphor and harden the glasses' surface. In addition, it is used in electricity conductive printing ink which is used in the basement flake in integrated circuit.

The usually used solvents of Ethyl Cellulose(DS:2.3-2.6) are aromatics and alcohols. The aromatics are benzene, toluene, ethylbenzene and xylene, suitable percent:60%-80%. The alcohols are methanol and ethanol etc. suitable ercent: 20-40%.
Ethyl Cellulose is slowly added to the vessel with organic solvent while stirrung, until it is completely wet and dissolved.
Ethyl Cellulose N10 N100

1. Industrial grade: 20kg/bag 
2.. Pharmaceutical grade: 20kg/drum 
If you need other package, kindly please tell us.


Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours